source: source/ariba/utility/bootstrap/modules/bluetoothsdp/BluetoothSdp.cpp@ 4925

// [License]
// The Ariba-Underlay Copyright
//
// Copyright (c) 2008-2009, Institute of Telematics, UniversitÀt Karlsruhe (TH)
//
// Institute of Telematics
// UniversitÀt Karlsruhe (TH)
// Zirkel 2, 76128 Karlsruhe
// Germany
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// 1. Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// 2. Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// THIS SOFTWARE IS PROVIDED BY THE INSTITUTE OF TELEMATICS ``AS IS'' AND
// ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE ARIBA PROJECT OR
// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// The views and conclusions contained in the software and documentation
// are those of the authors and should not be interpreted as representing
// official policies, either expressed or implied, of the Institute of
// Telematics.
// [License]

#include "BluetoothSdp.h"

#ifdef HAVE_BLUETOOTH_BLUETOOTH_H

// Attribute descriptors for SDP
// base was chosen randomly
#define SDP_SPOVNET_BASE                        0x4000
#define SDP_ATTR_SPOVNET_NAME           0x0000 + SDP_SPOVNET_BASE
#define SDP_ATTR_SPOVNET_INFO1          0x0001 + SDP_SPOVNET_BASE
#define SDP_ATTR_SPOVNET_INFO2          0x0002 + SDP_SPOVNET_BASE
#define SDP_ATTR_SPOVNET_INFO3          0x0003 + SDP_SPOVNET_BASE

// The SpoVNet unique identifier, this should be the same for all SpoVNet implementations
const uint8_t svc_uuid_int[] = {0x59, 0x29, 0x24, 0x34, 0x69, 0x42, 0x11, 0xde, 0x94,
        0x3e, 0x00, 0x21, 0x5d, 0xb4, 0xd8, 0x54};

const char *service_name = "SpoVNet";
const char *svc_dsc = "Spontaneous Virtual Network";
const char *service_prov = "ITM Uni Karlsruhe";

#endif // HAVE_BLUETOOTH_BLUETOOTH_H


namespace ariba {
namespace utility {
use_logging_cpp(BluetoothSdp)
;

//TODO: figure out this compiler flag stuff

BluetoothSdp::BluetoothSdp(BootstrapInformationCallback* _callback) :
        BootstrapModule(_callback), scan_timer_(io_service_) {
#ifdef HAVE_BLUETOOTH_BLUETOOTH_H

        // TODO: think about this!
        channel_ = 7;
        // TODO: what about the callback?

#endif // HAVE_BLUETOOTH_BLUETOOTH_H
}

BluetoothSdp::~BluetoothSdp() {
}

string BluetoothSdp::getName() {
        return "BluetoothSdp";
}

string BluetoothSdp::getInformation() {
        return "bootstrap module based on bluetooth service discovery protocol";
}

bool BluetoothSdp::isFunctional() {
#ifdef HAVE_BLUETOOTH_BLUETOOTH_H
        return true; // Not tested yet :)
#else
        return false;
#endif
}

void BluetoothSdp::start() {
#ifdef HAVE_BLUETOOTH_BLUETOOTH_H

        /*
         * Initializes and forks the scanner.
         */

        io_service_.post(boost::bind(&BluetoothSdp::bt_scan, this));
        t_ = boost::thread(boost::bind(&boost::asio::io_service::run, &io_service_));

#endif // HAVE_BLUETOOTH_BLUETOOTH_H
}

void BluetoothSdp::stop() {
#ifdef HAVE_BLUETOOTH_BLUETOOTH_H

        /*
         * Stops the scanner.
         */

        // not sure if this is thread safe
        io_service_.stop();
        t_.join();

#endif // HAVE_BLUETOOTH_BLUETOOTH_H
}

void BluetoothSdp::publishService(string name, string info1, string info2,
                string info3) {
#ifdef HAVE_BLUETOOTH_BLUETOOTH_H

        /*
         * Publishes an SpoVNet SDP Service and
         * adds the arguments as info attributes.
         */

        logging_info("Registering SDP service");

        uint8_t rfcomm_channel = channel_;

        uuid_t root_uuid, l2cap_uuid, rfcomm_uuid, svc_uuid, svc_class_uuid;
        sdp_list_t *l2cap_list = 0, *rfcomm_list = 0, *root_list = 0, *proto_list =
        0, *access_proto_list = 0, *svc_class_list = 0, *profile_list = 0;
        sdp_data_t *channel = 0;
        sdp_profile_desc_t profile;
        sdp_record_t record = {0};
        sdp_session_ = 0;

        bdaddr_t bdaddr_any = (bdaddr_t) { {0, 0, 0, 0, 0, 0}};
        bdaddr_t bdaddr_local = (bdaddr_t) { {0, 0, 0, 0xff, 0xff, 0xff}};

        // prepare the info attribute buffers
        string namebuf, info1buf, info2buf, info3buf;
        uint8_t namelen, info1len, info2len, info3len;

        namelen = (uint8_t)name.length();
        info1len = (uint8_t)info1.length();
        info2len = (uint8_t)info2.length();
        info3len = (uint8_t)info3.length();

        if((namelen > 256) || (info1len > 256) || (info2len > 256) || (info3len > 256)) {
                logging_error("String Argument too long, max size is 256!");
                return;
        }

        // we need to save the string len for sdp
        namebuf = (char)namelen;
        namebuf.append(name);
        info1buf = (char)info1len;
        info1buf.append(info1);
        info2buf = (char)info2len;
        info2buf.append(info2);
        info3buf = (char)info3len;
        info3buf.append(info3);

        // set the general service ID
        sdp_uuid128_create(&svc_uuid, &svc_uuid_int);
        sdp_set_service_id(&record, svc_uuid);

        // set the service class
        sdp_uuid16_create(&svc_class_uuid, SERIAL_PORT_SVCLASS_ID);
        svc_class_list = sdp_list_append(0, &svc_class_uuid);
        sdp_set_service_classes(&record, svc_class_list);

        // set the Bluetooth profile information
        sdp_uuid16_create(&profile.uuid, SERIAL_PORT_PROFILE_ID);
        profile.version = 0x0100;
        profile_list = sdp_list_append(0, &profile);
        sdp_set_profile_descs(&record, profile_list);

        // make the service record publicly browsable
        sdp_uuid16_create(&root_uuid, PUBLIC_BROWSE_GROUP);
        root_list = sdp_list_append(0, &root_uuid);
        sdp_set_browse_groups(&record, root_list);

        // set l2cap informatiint argc, char* argv[]on
        sdp_uuid16_create(&l2cap_uuid, L2CAP_UUID);
        l2cap_list = sdp_list_append(0, &l2cap_uuid);
        proto_list = sdp_list_append(0, l2cap_list);

        // register the RFCOMM channel for RFCOMM sockets
        sdp_uuid16_create(&rfcomm_uuid, RFCOMM_UUID);
        channel = sdp_data_alloc(SDP_UINT8, &rfcomm_channel);
        rfcomm_list = sdp_list_append(0, &rfcomm_uuid);
        sdp_list_append(rfcomm_list, channel);
        sdp_list_append(proto_list, rfcomm_list);

        access_proto_list = sdp_list_append(0, proto_list);
        sdp_set_access_protos(&record, access_proto_list);

        // set the name, provider, and description
        sdp_set_info_attr(&record, service_name, service_prov, svc_dsc);

        // add the spovnet attributes
        sdp_attr_add_new(&record, SDP_ATTR_SPOVNET_NAME, SDP_TEXT_STR8,
                        namebuf.data());

        sdp_attr_add_new(&record, SDP_ATTR_SPOVNET_INFO1, SDP_TEXT_STR8,
                        info1buf.data());

        sdp_attr_add_new(&record, SDP_ATTR_SPOVNET_INFO2, SDP_TEXT_STR8,
                        info2buf.data());

        sdp_attr_add_new(&record, SDP_ATTR_SPOVNET_INFO3, SDP_TEXT_STR8,
                        info3buf.data());

        // connect to the local SDP server, register the service record,
        // and disconnect
        sdp_session_ = sdp_connect(&bdaddr_any, &bdaddr_local, SDP_RETRY_IF_BUSY);

        if (sdp_session_ == 0) {
                logging_error( "Something is wrong with your SDP server, nothing registered" );
        } else {
                sdp_record_register(sdp_session_, &record, 0);
        }

        // cleanup
        sdp_data_free(channel);
        sdp_list_free(l2cap_list, 0);
        sdp_list_free(rfcomm_list, 0);
        sdp_list_free(root_list, 0);
        sdp_list_free(access_proto_list, 0);
        sdp_list_free(svc_class_list, 0);
        sdp_list_free(profile_list, 0);

#endif // HAVE_BLUETOOTH_BLUETOOTH_H
}

void BluetoothSdp::revokeService(string name) {
#ifdef HAVE_BLUETOOTH_BLUETOOTH_H

        logging_info("Unregistering SDP service");
        sdp_close(sdp_session_);

#endif // HAVE_BLUETOOTH_BLUETOOTH_H
}

#ifdef HAVE_BLUETOOTH_BLUETOOTH_H

void BluetoothSdp::bt_scan() {


        /*
         * Scans for other bluetooth devices and starts a SDP search on them.
         * Repeats 20 seconds after the end of the scan.
         */

        logging_info("Scanning for peers");

        inquiry_info *ii = NULL;
        int max_rsp, num_rsp;
        int dev_id, sock, len, flags;
        int i;

        /*
         char addr[19] = { 0 };
         char name[248] = { 0 };
         */
        bdaddr_t address;
        uint8_t channel;

        dev_id = hci_get_route(NULL);
        sock = hci_open_dev(dev_id);
        if (dev_id < 0 || sock < 0) {
                logging_error("opening socket");
                exit(1);
        }

        len = 8;
        max_rsp = 255;
        flags = IREQ_CACHE_FLUSH;
        ii = (inquiry_info*) malloc(max_rsp * sizeof(inquiry_info));

        num_rsp = hci_inquiry(dev_id, len, max_rsp, NULL, &ii, flags);
        if (num_rsp < 0)
                logging_error("hci_inquiry");

        for (i = 0; i < num_rsp; i++) {
                /*
                 ba2str(&(ii + i)->bdaddr, addr);
                 memset(name, 0, sizeof(name));
                 if (hci_read_remote_name(sock, &(ii + i)->bdaddr, sizeof(name),
                 name, 0) < 0)
                 strcpy(name, "[unknown]");
                 printf("%s  %s\n", addr, name);
                 */

                address = (ii + i)->bdaddr;

                logging_info("Peer found.")

                // TODO: sdp_search can be very slow, fork it!
                sdp_search(address);
        }

        free(ii);
        close(sock);

        logging_info("Next scan in 20 seconds");

        scan_timer_.expires_from_now(boost::posix_time::seconds(20));
        scan_timer_.async_wait(boost::bind(&BluetoothSdp::bt_scan, this));
}

void BluetoothSdp::sdp_search(bdaddr_t target) {

        /*
         * Searches target for SDP records with the SpoVnet uuid
         * and extracts its info attributes.
         */

        int status;
        uuid_t svc_uuid;
        sdp_list_t *response_list, *search_list, *attrid_list;
        sdp_session_t *session = 0;
        uint32_t range = 0x0000ffff;
        uint8_t port = 0;
        bdaddr_t any_addr = (bdaddr_t) { {0, 0, 0, 0, 0, 0}};

        // prepare the buffers for the attributes
        char name[256], info1[256], info2[256], info3[256];

        // connect to the SDP server running on the remote machine
        session = sdp_connect(&any_addr, &target, 0);

        if (session == 0) {
                // TODO: put the remote's address here
                logging_error("Failed to connect to remote SDP server.");
                return;
        }

        sdp_uuid128_create(&svc_uuid, &svc_uuid_int);
        search_list = sdp_list_append(0, &svc_uuid);
        attrid_list = sdp_list_append(0, &range);

        // get a list of service records that have UUID uuid_
        response_list = NULL;
        status = sdp_service_search_attr_req(session, search_list,
                        SDP_ATTR_REQ_RANGE, attrid_list, &response_list);

        if (status == 0) {
                sdp_list_t *proto_list = NULL;
                sdp_list_t *r = response_list;

                // go through each of the service records
                for (; r; r = r->next) {
                        sdp_record_t *rec = (sdp_record_t*) r->data;

                        // get a list of the protocol sequences
                        if (sdp_get_access_protos(rec, &proto_list) == 0) {

                                // get the RFCOMM port number
                                port = sdp_get_proto_port(proto_list, RFCOMM_UUID);

                                sdp_list_free(proto_list, 0);

                                sdp_get_string_attr(rec, SDP_ATTR_SPOVNET_NAME, (char*)&name, 256);
                                sdp_get_string_attr(rec, SDP_ATTR_SPOVNET_INFO1, (char*)&name, 256);
                                sdp_get_string_attr(rec, SDP_ATTR_SPOVNET_INFO2, (char*)&name, 256);
                                sdp_get_string_attr(rec, SDP_ATTR_SPOVNET_INFO3, (char*)&name, 256);

                                logging_info("Remote peer name is: " << name);
                                logging_info("Remote peer info1 is: " << info1);
                                logging_info("Remote peer info2 is: " << info2);
                                logging_info("Remote peer info3 is: " << info3);
                                //TODO: callback here + extract info's and stuff
                        }
                        sdp_record_free(rec);
                }
        }
        sdp_list_free(response_list, 0);
        sdp_list_free(search_list, 0);
        sdp_list_free(attrid_list, 0);
        sdp_close(session);

}

#endif // HAVE_BLUETOOTH_BLUETOOTH_H

}} //namespace ariba, utility