Changes between Version 9 and Version 10 of Documentation/VLC


Ignore:
Timestamp:
Apr 26, 2010, 5:20:50 PM (15 years ago)
Author:
stud-hock
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • Documentation/VLC

    v9 v10  
    5050
    5151Run two instanced of the modified vlc-players:[[BR]]
    52 LANG=en_US.UTF-8 vlc-mcpo & LANG=en_US.UTF-8 vlc-mcpo & [[BR]]
     52° LANG=en_US.UTF-8 vlc-mcpo & LANG=en_US.UTF-8 vlc-mcpo & [[BR]]
    5353(Note: "LANG=en_US.UTF-8" sets the language of these two vlc-instances on English for easier following the instructions below.)
    5454
    … …  
    5757
    5858On [R] please click: Media > Open Network Stream... [[BR]]
    59 Then choose: Protocol: »MCPO« (Note: If you can only see protocols like: HTTP, HTTPS, UDP, etc but no MCPO then the plugin wasn't load into your vlc. Please refer to the trouble shooting section in this case.) [[BR]]
    60 The address field should now look like this: 1234:localhost:5000 [[BR]]
    61 Press »play«.
     59° Then choose: Protocol: »MCPO« (Note: If you can only see protocols like: HTTP, HTTPS, UDP, etc but no MCPO then the plugin wasn't load into your vlc. Please refer to the trouble shooting section in this case.) [[BR]]
     60° The address field should now look like this: 1234:localhost:5000 [[BR]]
     61° Press »play«.
    6262
    63 Continuing on [S], click: Meda > Streaming... [[BR]]
    64 Add a video file. (For a first test we recommend the test-video [coming soon], or at least a video you're successfully able to stream via UDP. Just eliminate sources of error not connected to the vlc-mcpo plugin.) [[BR]]
    65 Press »Stream«. [[BR]]
    66 Press »Next«. [[BR]]
    67 Choose »MCPO« and press »Add«. [[BR]]
    68 Now you can see: Source: Port: 5000; Destination: Address: localhost, Port: 1234 [[BR]]
    69 Disable transcoding and press »Stream«. [[BR]]
    70 After a few seconds you should see the video in [R].
     63° Continuing on [S], click: Meda > Streaming... [[BR]]
     64° Add a video file. (For a first test we recommend the test-video [coming soon], or at least a video you're successfully able to stream via UDP. Just eliminate sources of error not connected to the vlc-mcpo plugin.) [[BR]]
     65° Press »Stream«. [[BR]]
     66° Press »Next«. [[BR]]
     67° Choose »MCPO« and press »Add«. [[BR]]
     68° Now you can see: Source: Port: 5000; Destination: Address: localhost, Port: 1234 [[BR]]
     69° Disable transcoding and press »Stream«. [[BR]]
     70° After a few seconds you should see the video in [R].
    7171
    7272