Ariba VLC Plugin - Overlay-based Videostreaming using Ariba and MCPO Application Layer Multicast

NOTE! This text is currently under development. Please do not rely on completeness or even correctness of the following content.

User Guide

What is the VLC-MCPO plugin?

The vlc-mcpo plugin is an (not yet) open source streaming module for the vlc-mediaplayer (​http://www.videolan.org). It comes with a sender and a receiver module. And is able to handle any kind of stream, vlc can deal with.

The plugin uses the mcpo multicast protocol, which is part of the ariba framework.

Ariba provides a virtual overlay net. [...]

For more information about ariba or the SpoVNet project, please refer to: ​http://www.ariba-underlay.org/, ​http://www.spovnet.de/

Setting up / installing

The ariba framework is currently only available on linux and therefor the plugin is linux-only at the moment.

A quick and simple way for testing but also useing the plugin are the precompiled libraries. In this section we describe how to set up an ubuntu 10.04 for this purpose. This should be adoptable to other linux distributions in an easy manner. Instructions how to compile the plugin will be provided in the Developers Guide below.

For running the vlc-mcpo plugin a number of packages have to be installed:

sudo apt-get install vlc
sudo apt-get install libboost-system1.40.0
sudo apt-get install libboost-thread1.40.0
sudo apt-get install libboost-regex1.40.0
sudo apt-get install liblog4cxx10
sudo apt-get install libdb4.7

Please download the tar-ball containing the required libraries: 32bit linux: [ coming soon ] 64bit linux: [ coming soon ]

Unpack the archive to $HOME. (If you choose another location, you have to adjust the path in the running script.)

Now you can link the running-script to $HOME/bin or /usr/bin via:
cd $HOME/bin
ln -s $HOME/vlc-mcpo/run.sh vlc-mcpo

Or just run from where it is.

(Note: If you just created the $HOME/bin folder, you have to start a new bash.) (Note: The following instructions assume you created one of links described above.)

A first test.

Now it's time for a first simple test.

Run two instanced of the modified vlc-players: vlc-mcpo & vlc mcpo &

Two vlc-windows should open, let's call them [S] and [R].

On [R] please click: Media > Open Network Stream...
Then choose: Protocol: MCPO (Note: If you can only see protocols like: HTTP, HTTPS, UDP, etc but no MCPO then the plugin wasn't load into your vlc. Please refer to the trouble shooting section in this case.)
The address field should now look like this: 1234:localhost:5000
Press play.

Continuing on [S], click:

Scenarios / examples

Trouble shooting

Developer Guide