Ariba VLC Plugin - Overlay-based Videostreaming using Ariba and MCPO Application-Layer Multicast

What is the VLC-MCPO plugin?

The vlc-mcpo plugin is an Open Source streaming module for the ​VLC media player. It enables video streaming through the overlay-based virtual network substrate Ariba in combination with the MCPO application-layer multicast protocol. With vlc-mcpo you can deliver video streams to groups of users, similar to IP Multicast, but without any need of in-network multicast support. Also, through the use of Ariba, vlc-mcpo can cope with several protocol issues such as IPv4/IPv6 transitions, Network Address Translation (NAT), and many more networking problems in a self-organized and distributed manner.

For more information about Ariba, MCPO, or the SpoVNet project, please refer to: ​http://www.ariba-underlay.org , ​http://www.spovnet.de

Setting up / installing

The ariba framework is currently available for Linux, therefor, the plugin is also Linux-based. As soon as further platforms are available it will be announced here.

A quick and simple way for testing and using the plugin (besides compilation) is the use of precompiled libraries, which we provide. In this section we describe how to set up an Ubuntu 9.10 or 10.04 for this purpose. This should be adoptable to other Linux distributions easily. Instructions how to compile the plugin are provided in the Developers Guide below.

For running the vlc-mcpo plugin a number of packages are required on the target system:

sudo apt-get install vlc
sudo apt-get install libboost-system1.40.0
sudo apt-get install libboost-thread1.40.0
sudo apt-get install libboost-regex1.40.0
sudo apt-get install liblog4cxx10

Please download the tar-ball containing the Ariba and the plugin libraries:
32bit linux: [ coming soon ]
64bit linux: [ coming soon ]

Unpack the archive to $HOME. (If you choose another location, you have to adjust the path in the running script.)

Now you can link the running-script to $HOME/bin or /usr/bin via:

cd $HOME/bin
ln -s $HOME/vlc-mcpo/run.sh vlc-mcpo

Or just run from where it is.

(Note: If you just created the $HOME/bin folder, you have to start a new bash.) (Note: The following instructions assume you created one of links described above.)

A first test:

Now it's time for a first simple test.

Run two instances of the modified vlc-players:

LANG=en_US.UTF-8 vlc-mcpo & LANG=en_US.UTF-8 vlc-mcpo &

(Note: LANG=en_US.UTF-8 sets the language of these two vlc-instances on English for easier following the instructions below.)

Two vlc-windows should open, let's call them [S] and [R].

• Receiver side [R]
  • On [R] please click: Media > Open Network Stream...
    
  • Then choose: Protocol: »MCPO« (Note: If you can only see protocols like: HTTP, HTTPS, UDP, etc but no MCPO then the plugin wasn't load into your vlc. Please refer to the trouble shooting section in this case.)
    
  • The address field should now look like this: 1234:localhost:5000
    
  • Press »play«.

• Server side [S]
  • Continuing on [S], click: Media > Streaming...
    
  • Add a video file. (For a first test we recommend the test-video [coming soon], or at least a video you're successfully able to stream via UDP. Just eliminate sources of error not connected to the vlc-mcpo plugin.)
    
  • Press »Stream«.
    
  • Press »Next«.
    
  • Choose »MCPO« and press »Add«.
    
  • Now you can see: Source: Port: 5000; Destination: Address: localhost, Port: 1234
    
  • Disable transcoding and press »Stream«.
    
  • After a few seconds you should see the video in [R].

Usage

In this section we describe the parameters of the mcpo-vlc plugin and some usage scenarios which demonstrate the strength of the mcpo approach.

Mcpo-vlc uses a Spontaneous Virtual Network (SpoVNet) for distributing the video content. Each SpoVNet have to consist of 0-1 senders and 0-N receivers. The connection procedure does not depend on the role (sender/receiver) one instance has. This can confuse a little in the beginning, as on most streaming protocols the role defines whether one instance is client or server.

Parameters

The mcpo-vlc plugin takes three connection parameters. SourcePort:DestinationAddress:DestinationPort (e.g. 1234:localhost:5000)

The SourcePort provides an entry point for other instances to the SpoVNet our instance is in (or will be in). To access this entry point DestinationAddress and DestinationPort must be set on the IP address (or domain name) and SourcePort of an instance in the targeted SpoVNet.

An instance which has not connected to such an entry point makes up a SpoVNet with only itself in it.

Creating a SpoVNet

At first we need an initial SpoVNet, consisting of a single mcpo-vlc instance. This instance can either be server or client but must be accessible from (at least) the second instance. (Means, it mustn't be blocked by a firewall or NAT.) On the first instance we have to set the SourcePort. DestinationAddress and -Port can be set but as long as there is no other instance listening there, setting this parameters has no effect.

On the second instance, DestinationAddress and -Port must be set adequate. It can also set the SourcePort to act as an entry point later.

A third instance can either use the first instance or the second one as an entry point. (Given that both are accessible and have their SourcePort set.)

Et cetera.

Note: In the current implementation the sender begins the transmission immediately when it's ready. Using the sender as initial node may result in missing the beginning of the transmission.

Examples / Scenarios

    192.168.1.1              192.168.1.2
       _____                    _____ 
      |  1. |                  |  2. |
      |_____|  ------>------   |_____|
      \______\                 \______\

        5000:             1234:192.168.1.1:5000

    192.168.1.1              192.168.1.2
       _____                    _____ 
      |  2. |                  |  1. |
      |_____|  ------>------   |_____|
      \______\                 \______\

 5000:192.168.1.1:1234           1234:

    192.168.1.1              192.168.1.2
       _____                    _____ 
      |  1. |                  |  2. |
      |_____|  -->--+--->---   |_____|
      \______\       \         \______\
                      \
        5000:          V   1234:192.168.1.1:5000
                        \
                         \
                     192.168.1.3
                        _____ 
                       |  3. |
                       |_____|
                       \______\

                 1234:192.168.1.2:1234

  192.168.1.100                 192.168.178.100
       _____    »           «      _____ 
      |  3. |   »           «     |  2. |
      |_____|  -»->--+--->--«--   |_____|
      \______\  »     \     «     \______\
                »      \    «
5000:141.3.70.130:1234  V      1234:141.3.70.130:1234
                         \
                          \
                      141.3.70.130
                         _____ 
                        |  1. |
                        |_____|
                        \______\

                          1234:

Legend:

   IP-Address
      _____ 
     | Nr. |  (These Numbers describe 
     |_____|    the start-up order of the instances.)
     \______\

  Parameter string


Video stream direction:
--------- > ---------


Firewall:
   »
   »
   »
   »
   »

Trouble shooting

Developer Guide

The Developer Guide describes how to compile VLC and the vlc-mcpo plugin, and how to insert the plugin's code into an existing VLC code.

Compile Ariba & MCPO

In order to compile the vlc-mcpo plugin, you have to install Ariba and MCPO first. By following the instructions below, you compile and install them to $HOME/local in your home-directory. Further information are provided on the official Ariba-Installation page (​http://ariba-underlay.org/wiki/BaseInstall).

On ubuntu 9.10 / 10.04 the following packages are necessary:

• build-essential
• libtool
• autoconf
• automake
• libgmp3-dev
• liblog4cxx10-dev
• libboost-thread-dev
• libboost-system-dev
• libboost-regex-dev
• (subversion)

* get the Ariba sourcecode
* in the "ariba"-directory do:
   ./bootstrap
   ./configure --prefix=$HOME/local
   make install

* get the MCPO sourcecode
* in the "mcpo"-directory do:
   ./bootstrap
   ./configure --prefix=$HOME/local LDFLAGS=-L$HOME/local/lib CPPFLAGS=-I$HOME/local/include
   make install

Getting the plugin code

The source code package contains a modified vlc-1.0.6 including the vlc-mcpo sender code, the receive code and the gui modifications. If you want to compile a vlc-1.0.6 (same version as in the ubuntu 10.04 repository) you can continue reading the compile the modified VLC section.

The following instructions help to insert the plugin code into an existing vlc source (e.g. from a different version than 1.0.6):

Input and Output Modules

• Get the vlc source code you intend to modify.
• Insert the following folders from "our" source code:
  • vlc/modules/access/mcpo
  • vlc/modules/access_output/mcpo
• Activate the new folders by adjusting the following files. (You can make a {{diff}}} with our version of these files to see the changes.):
  • vlc/configure.ac
  • vlc/access/Modules.am
  • vlc/access_output/Modules.am

Note: The file vlc/modules/access_output/mcpo/mcpo.c is based on vlc/modules/access_output/udp.c. You might to consider this, if you work on this code.

GUI support

For MCPO-Gui support please adjust the following files. You can see the changes by making a diff between your version of these files and the original ones.

• vlc/modules/gui/qt4/dialogs/sout.cpp
• vlc/modules/gui/qt4/components/open_panels.cpp
• vlc/modules/gui/qt4/components/open_panels.hpp
• vlc/modules/gui/qt4/components/sout/sout_widgets.cpp
• vlc/modules/gui/qt4/components/sout/sout_widgets.hpp

Logging Level

Probably you want to set the ariba logging output to "info":

* on vlc/modules/access/mcpo/McpoModule.cpp edit line 24
    from:
      logger->setLevel(log4cxx::Level::getWarn());
    to:
      logger->setLevel(log4cxx::Level::getInfo());

* Equally on vlc/modules/access_output/mcpo/McpoModule.cpp line 30.

Compile the modified VLC

Before you start, please install the vlc build-dependencies. On Ubuntu you can get all the dependencies via:

sudo apt-get build-dep vlc

Then prepare the code by running

./bootstrap

and

./configure

with suitable parameters.

If you have a version of VLC already installed, you can get it's configure parameters via: vlc --version --verbose=2

We recommend the following configure line:
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$HOME/local
./configure --prefix="$HOME/local" '--build=i486-linux-gnu' '--disable-update-check' '--enable-fast-install' '--enable-release' '--with-binary-version=1ubuntu1.1' '--disable-atmo' '--disable-fluidsynth' '--disable-gnomevfs' '--disable-kate' '--disable-mtp' '--enable-x264' '--disable-zvbi' '--enable-a52' '--enable-aa' '--enable-bonjour' '--enable-caca' '--enable-dca' '--enable-dvb' '--enable-dvbpsi' '--enable-dvdnav' '--enable-faad' '--enable-flac' '--enable-freetype' '--enable-fribidi' '--enable-ggi' '--enable-gnutls' '--enable-jack' '--enable-libass' '--enable-libmpeg2' '--enable-lirc' '--enable-live555' '--enable-mad' '--enable-mkv' '--enable-mod' '--disable-mozilla' '--enable-mpc' '--enable-ncurses' '--enable-notify' '--enable-ogg' '--enable-pulse' '--enable-qt4' '--enable-realrtsp' '--enable-sdl' '--enable-shout' '--enable-skins2' '--enable-smb' '--enable-speex' '--enable-svg' '--enable-taglib' '--enable-telx' '--enable-theora' '--enable-twolame' '--enable-vcd' '--enable-vcdx' '--enable-vorbis' '--enable-alsa' '--enable-pvr' '--enable-v4l' '--enable-v4l2' '--enable-svgalib' 'build_alias=i486-linux-gnu' 'CFLAGS=-I${HOME}/local/include -g -O2' 'LDFLAGS=-L${HOME}/local/lib -Wl,--as-needed' 'CPPFLAGS=-I${HOME}/local/include' 'CXXFLAGS=-g -O2' LIBS="-L${HOME}/local/lib -lariba -lmcpo"

Having the code successfully configured, compile VLC via:

make

and install it via:

make install

For further instructions about compiling VLC please have at look at: ​http://wiki.videolan.org/UnixCompile